激光测距机主要参数校准测量不确定度分析

简述激光测距机主要参数校准装置的组成，通过对其主要参数(最大测程、最小测程、测距准确度、重复频率、束散角)的校准测量进行详细的不确定度分析，评价激光测距机主要参数校准装置的达标程度。     

反应扩散系统中波传播的锁频现象

在空间延展系统中,当增强外部光强时,作者观察到波传播的N：N-1（N≥2）锁频现象.此现象是在光敏BZ反应实验中观察到的.通过构建一个映射函数,发现在波周期和外部光强的关系中存在魔鬼阶梯,并且此阶梯与实验数据相吻合.     

Explicit analytical solutions of the anisotropic Brinkman model for the natural convection in porous media (Ⅱ)

Some algebraically explicit analytical solutions are derived for the anisotropic Brinkman model―an improved Darcy model―describing the natural convection in porous media. Besides their important theoretical meaning (for example, in analyzing the non-Darcy and anisotropic effects on the convection), such analytical solutions can be the benchmark solutions that can promote the development of computational heat and mass transfer. Some solutions considering the anisotropic effect of permeability have been given previously by the authors, and this paper gives solutions including the anisotropic effect of thermal conductivity and the effect of heat sources.     

甚高频等离子体增强化学气相沉积制备微晶硅太阳电池的研究

采用甚高频等离子体增强化学气相沉积技术成功地制备了不同硅烷浓度和辉光功率条件下的微晶硅电池.电池的J-V测试结果表明：在实验的硅烷浓度和功率范围内，随硅烷浓度的降低和功率的加大，对应电池的开路电压逐渐变小；硅烷浓度的不同对电池的短路电流密 度有很大的影响，但功率的影响在实验研究的范围内不是很显著.对于微晶硅电池，N层最好 是非晶硅，这是因为一方面可以降低对电流的横向收集效应，另一方面也降低了电池的漏电概率，提高了电池的填充因子. 关键词： 微晶硅太阳电池 甚高频等离子体增强化学气相沉积     

Effect of silane coupling agent on the polymer‐filler interaction and mechanical properties of silica‐filled NR

The effects of filler loading and a new silane coupling agent 3‐octanoylthio‐1‐ propyltriethoxysilane (NXT silane) on the polymer‐filler interaction and mechanical properties of silica‐filled and carbon black‐filled natural rubber (NR) compounds were studied. Silica (high dispersion silica7000GR, VN2, and VN3) and carbon black (N330) were used as the fillers, and the loading range was from 0 to 50 phr. The loading of NXT silane was from 0 to 6 phr. Experimental results show that the maximum and minimum torques of silica and carbon black‐filled NR increase with increasing filler loading. With increasing filler loading, the scorch time and optimum cure time decrease for carbon black‐filled NR, but increase for silica‐filled NR. The minimum torque, scorch time, and optimum cure time decrease because of the presence of NXT silane. For the carbon black and silica‐filled NR, the tensile strength and elongation at break have maximum values, but the hardness, M300, M100, and tear strength keep increasing with filler loading. The mechanical properties of silica‐filled NR were improved in the presence of NXT silane. With increasing filler loading, the storage modulus of filled NR increases, but the loss factor decreases. Carbon black shows the strongest polymer‐filler interaction, followed by VN3, 7000GR, and VN2. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 573–584, 2005     

Homotopy Theories of Algebras over Operads

Homotopy theories of algebras over operads, including operads over “little n-cubes,” are defined. Spectral sequences are constructed and the corresponding homotopy groups are calculated.__________Translated from Matematicheskie Zametki, vol. 78, no. 2, 2005, pp. 278–285.Original Russian Text Copyright © 2005 by V. A. Smirnov.     

A reference solution for phase change with convection

A reference solutions for phase change involving convection in the melt is currently missing. In the present study, we focus on the problem of melting of pure tin in a square cavity heated from the side, which is used as a benchmark test problem. The mathematical model used for the simulations is based on the enthalpy formulation. Extensive numerical computations are performed with grids as fine as 800 × 800. The convergence of the numerical solution is demonstrated and its level assessed. Data values and plots are provided for use as a reference solution. Copyright © 2005 John Wiley & Sons, Ltd.     

飞秒激光作用下全向高反膜破坏的激发过程

设计和制备了全向高反膜SiO₂/TiO₂，研究了它在不同脉冲宽度、不同脉冲能量的飞秒激光作用下的破坏阈值和烧蚀深度.利用发展的抽运-探针方法，研究了抽运脉冲作用下材料中导带电子的超快激发和能量沉积过程，建立并求解了飞秒激光激发材料和材料的激发对抽运光自身反作用的耦合动力学模型.模型较好地揭示了材料破坏的激发过程. 关键词： 飞秒激光 全向高反膜 激发过程 破坏机制     

Novel Oxygen Storage Components Promoted Palladium Catalysts for Emission Control in Natural Gas Powered Engines

A three-way catalyst comprised novel oxygen storage components for emission control in natural gas powered engines was prepared. The addition of novel oxygen storage components to the Pd/γ-Al2O3 catalysts resulted in improved activities of the fresh and aged catalyst by lowering the light-off temperature for methane in natural gas engines exhaust.